Plans for a solid gunstand

1 each10' stick of 3/4 PVC Schedule 40 series

2 each 45degree 3/4 elbows

2 each 3/4x3/4x3/4  tee's

7 each 90 degree 3/4 elbows

1 each 3/4x1/2"threaded adaptor

    UPC# 62623  Part number 436-074 @ Home Depot

1 each 3/4x3/4x1/2fem thread 3-way adaptor elbow

    UPC#142721 @ Home Depot

2 each Pre-bent 3/4 pipe  UPC#    0   12871 62975   4

These are the parts and make sure you have a good hacksaw or saw to cut the pvc.

Cut 4 each 2 inch sectionsof 3/4 pvc pipe

Cut 2 each 8 inch sections of 3/4 pvc pipe

Cut 2 each 7 inch sections of 3/4 pvc pipe

Cut 2 each 4 inch sections of 3/4 pvc pipe

   The 4 inch sections can be custom cut from 3 to 5 inches depending on the length

    of the bottle you have.   Experiment with it to suit the marker, bottle combination.

Click here for the updated version of the gunstand.   Now with provision for the mask.   Check it out.